* Pad: report the adaptive trigger state instead of always 0
scePadGetTriggerEffectState returned 0 for both triggers. Games that wait for
the state of the trigger effect they set before acting on L2/R2 never saw it
change; in Astro Bot, L2/R2 actions such as punches did nothing in some levels.
The state now follows from the game's last effect per trigger (already kept
for the DualSense output) and the trigger's travel, 0..255 over the effect's
ten positions: feedback no force / pushing, weapon not / almost / fully
pressed, vibration not firing / firing, with the values 1..7 that duaLib
(WujekFoliarz/duaLib) reads from a DualSense input report. SDL does not expose
that report, so this is an approximation; it also works with other pads and
the keyboard, where a digital L2/R2 is full travel. The trigger intensity
setting changes only the output, not the reported state.
Tested in Astro Bot (PPSA21567 1.018) by a player in the levels where the
triggers did nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* tests: controller_settings covers scePadGetTriggerEffectState
Feedback, weapon and vibration states across the trigger travel, a trigger without an effect, a masked update keeping the other trigger's effect, and the intensity setting leaving the reported state unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: a feedback trigger reports pushing only while it is pressed
A feedback effect from position 0 reported FEEDBACK_IS_PUSHING on an untouched trigger, so a game waiting for the change from no force to pushing never saw it. In Astro's Playroom the gacha capsules did not break on R2. Feedback states (modes 1, 4, 5) now need some travel (>= 8 of 255). Tested in Astro's Playroom (PPSA01325): the capsules break on R2 again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: a vibration trigger reports firing only while it is pressed
A vibration effect from position 0 reported VIBRATION_IS_FIRING on an untouched trigger; in Astro's Playroom the gun fired by itself. Vibration states (modes 3 and 6) now need some travel, as the feedback states do. Tested in Astro's Playroom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: reject invalid handles in scePadGetTriggerEffectState; test the remaining effect modes
scePadGetTriggerEffectState ignored its handle and returned pad 1's state for any handle. It now returns
SCE_PAD_ERROR_INVALID_HANDLE (0x80920003) for handles other than 1, like the other pad queries in libPad.cpp
and duaLib.
controller_settings now also covers multiple-position feedback (mode 4: pushes only at positions with a
strength), slope feedback (mode 5: pushes from its start position, not on an untouched trigger) and
multiple-position vibration (mode 6: fires only at positions with an amplitude and a frequency).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: scePadGetTriggerEffectState returns libScePad's invalid-argument code
A null state returned 0x80960005, which is SCE_USER_SERVICE_ERROR_INVALID_ARGUMENT,
not a pad error; libScePad's code is SCE_PAD_ERROR_INVALID_ARG (0x80920001), as
scePadSetTriggerEffect returns. The call now lives with the other pad calls in
controller.cpp so controller_settings tests its handle and argument checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: correct trigger effect state reporting
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* pad: send DualSense speaker and haptic audio over Bluetooth
* ci: fix Opus clang-cl build and macOS memory tracker test
* docs: remove Bluetooth notes from project README
* pad: keep Bluetooth audio work off emulation timing path
* pad: smooth DualSense speaker audio on USB and Bluetooth
* tests: find available macOS guest range for page manager
* pad: keep haptic waveform when Bluetooth queue overflows
* audio: reject zero output sample frequency
* Simplify DualSense audio routing and fix Bluetooth batching
* controller: add global DualSense volume and vibration controls
* Simplify global controller settings
---------
Co-authored-by: Codex <codex@openai.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* controller: cycle DualSense speaker volume, vibration and trigger intensity in game
Three new input mapping controls cycle the PS5's controller settings in
game (default keys 1, 2 and 3): speaker volume (100% -> off -> 2% -> 12%
-> 42%), vibration intensity and trigger effect intensity (strong -> off
-> weak -> medium). Each starts at full and is not saved.
Changing vibration or trigger intensity re-sends the game's last rumble
and trigger effect, so the change is felt immediately.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clean up controller settings test captures and formatting
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
launcher: configure and preview controller lightbar color
Add an optional lightbar color to launcher settings and pass it to the emulator with --controller-color. Preview changes on RGB gamepads, handle controller hotplug events, and restore the saved color when settings dialogs close. Release launcher preview handles when starting a game.
Co-authored-by: m66401970-eng <m66401970@gmail.com>
* audio: play DualSense haptics from vibration audio ports
Games drive the DualSense's actuators through a vibration audio port, one channel per actuator.
These ports had no device, so their samples were dropped. Over USB the DualSense is a 4-channel
audio device whose back channels feed the actuators; play the port's samples there through SDL.
The device is looked up while the port plays, so the controller can be connected at any time. The
queue keeps about the latency of the regular audio path, with the playback rate nudged by up to 3%
when the port is fed off real time.
While haptic audio plays, hold a DualSense's rumble at zero: SDL disables audio haptics whenever
rumble is non-zero.
Add pad_haptics tests for the sample conversion, device-name matching and rate correction.
* Simplify DualSense audio haptics and restore idle rumble
---------
Co-authored-by: nmzik <Nmzik@mail.ru>
* controller: enable the DualSense HIDAPI driver, light bar and adaptive triggers
Three additions. SDL was opening a DualSense through the generic gamepad path, so SDL_GameControllerHasLED and SDL_GameControllerGetNumTouchpads both reported nothing and no touchpad events ever arrived - enabling the PS5 HIDAPI driver before SDL_InitSubSystem is what makes the light bar and the existing touchpad support reachable. PadSetLightBar validated its arguments and returned OK without touching the pad; it now drives the LED. PadSetTriggerEffect did the same; it now translates the mode and parameters into a DualSense trigger block and sends it.
* controller: fix DualSense effects
---------
Co-authored-by: nmzik <Nmzik@mail.ru>
Scale the SDK 8-bit motor levels to SDL’s 16-bit range and use SDL’s maximum effect duration. Keep lookup and rumble under the controller lock so hot unplug cannot invalidate the SDL pointer.
Add compact keyboard and mouse mapping with analog-stick defaults and integrate a global remapping editor into the Qt launcher.
Based on the host input remapping work from PR #109.
Co-authored-by: DistantMyth <thetarun3@gmail.com>
Leandro Bras