* agc: implement sceAgcSetNop
Star Wars Outlaws calls sceAgcSetNop (K2mciNVxUCE) and crashes right after
the unresolved stub returns, without the packet being disabled.
The call turns a packet into a NOP of the same length. Clear the emulator's
custom NOP code as well, so packets that the HLE encodes as NOPs, such as
end-of-pipe actions, stop executing too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* agc: keep packets disabled by sceAgcSetNop from reading as markers
A disabled packet whose first payload word carries the 0x6875 marker
signature still reached the marker handler, which can flip or stop on an
unknown marker ID. Clear the signature so the packet is skipped like any
other NOP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* agc: tidy SetNop logging and comments
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
Glyph images were rendered into a fixed 128x128 buffer and their width and
height were clamped to 128. Since glyphs are rasterized at the requested
scale (f96a14a0), large text such as title cards lost every row and column
past 128 pixels, so letters were drawn cut into bands.
The glyph buffers now grow to the glyph's bitmap box and width_byte is the
glyph's width. The VGA fallback font keeps its 128-pixel limit; scalable
glyphs are limited to 4096 pixels only to reject absurd scales.
* ampr: keep resolved host paths in native form
ResolveOnePath stored each resolved file as a UTF-8 std::string
(Common::PathToString) and the read, stat and size paths turned that
string back into a std::filesystem::path. On POSIX this round trip is a
no-op, but on Windows path(std::string) decodes the bytes with the ANSI
code page, not UTF-8 (/utf-8 only sets the source and execution
charsets). Any non-ASCII character in the game folder therefore produced
a different path: the resolve step found the file through the native
path, then every APR read of it failed with ENOENT.
Tokyo Xtreme Racer (#1156) installed under "D:/Инсталляторы/[ps5]/..."
hits this on its first pak read:
APR read missing host file: .../tokyoxtremeracer/content/paks/global.utoc
Apr read failure 80020002 at CB offset 0 (LowLevelFatalError, abort)
even though KernelStat and the directory listing see the same file.
Store std::filesystem::path in ResolvedPathInfo and the file-id table
and pass it straight to Common::File. Convert to UTF-8 only for the log
lines.
* tests: cover APR stat and size under a non-ASCII host folder
Resolve a file inside a Cyrillic directory through APR and check that
the stat and size exports find it by ID, matching the Tokyo Xtreme
Racer install layout from #1156. On POSIX the old string round trip
also passed, so this guards the Windows path.
* tests: read the non-ASCII APR fixture through an APR command
Review on #1175 noted that the Unicode fixture only checked the stat
and size exports. A submitted APR read opens the stored host path in
ExecuteCommand/ReadHostFileToGuest, which the fixture did not reach.
Add AprReadMatches, which submits one APR read command for a file ID
and compares the bytes, and use it on the file under the Cyrillic
folder. As with the stat and size checks, POSIX hosts run this path but
only Windows would show an ANSI code page round trip.
* Remove APR path tests from this change
* Remove unrelated formatting changes
* Remove native path explanatory comments
---------
Co-authored-by: overlordxrz-source <overlordxrz-source@users.noreply.github.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* libNet: answer sceNpGetAccountLanguage2 as a signed-out user
sceNpGetAccountLanguage2 was not registered, so games that call it hit
the unresolved-import stub. The stub returns 0, which tells the game the
request succeeded and that the language code buffer now holds the
account's language, but nothing was written to it.
Saros (#1053) calls it from its analytics thread right after
sceNpGetAccountAge, each on its own request. sceNpGetAccountAge already
reports SCE_NP_ERROR_SIGNED_OUT there, so the game is told the user is
signed out for one query and signed in for the next. Demon's Souls
(#890), Ghost of Yotei (#1095) and NHL 27 (#1101) import it as well.
Register it next to the other NpManager account queries and answer the
way they do: SCE_NP_ERROR_INVALID_ARGUMENT for a request id <= 0 or a
null output pointer, SCE_NP_ERROR_SIGNED_OUT otherwise. The output is
left untouched because nothing was looked up.
* libNet: reject missing account language requests
---------
Co-authored-by: overlordxrz-source <overlordxrz-source@users.noreply.github.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* Pad: report the adaptive trigger state instead of always 0
scePadGetTriggerEffectState returned 0 for both triggers. Games that wait for
the state of the trigger effect they set before acting on L2/R2 never saw it
change; in Astro Bot, L2/R2 actions such as punches did nothing in some levels.
The state now follows from the game's last effect per trigger (already kept
for the DualSense output) and the trigger's travel, 0..255 over the effect's
ten positions: feedback no force / pushing, weapon not / almost / fully
pressed, vibration not firing / firing, with the values 1..7 that duaLib
(WujekFoliarz/duaLib) reads from a DualSense input report. SDL does not expose
that report, so this is an approximation; it also works with other pads and
the keyboard, where a digital L2/R2 is full travel. The trigger intensity
setting changes only the output, not the reported state.
Tested in Astro Bot (PPSA21567 1.018) by a player in the levels where the
triggers did nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* tests: controller_settings covers scePadGetTriggerEffectState
Feedback, weapon and vibration states across the trigger travel, a trigger without an effect, a masked update keeping the other trigger's effect, and the intensity setting leaving the reported state unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: a feedback trigger reports pushing only while it is pressed
A feedback effect from position 0 reported FEEDBACK_IS_PUSHING on an untouched trigger, so a game waiting for the change from no force to pushing never saw it. In Astro's Playroom the gacha capsules did not break on R2. Feedback states (modes 1, 4, 5) now need some travel (>= 8 of 255). Tested in Astro's Playroom (PPSA01325): the capsules break on R2 again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: a vibration trigger reports firing only while it is pressed
A vibration effect from position 0 reported VIBRATION_IS_FIRING on an untouched trigger; in Astro's Playroom the gun fired by itself. Vibration states (modes 3 and 6) now need some travel, as the feedback states do. Tested in Astro's Playroom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: reject invalid handles in scePadGetTriggerEffectState; test the remaining effect modes
scePadGetTriggerEffectState ignored its handle and returned pad 1's state for any handle. It now returns
SCE_PAD_ERROR_INVALID_HANDLE (0x80920003) for handles other than 1, like the other pad queries in libPad.cpp
and duaLib.
controller_settings now also covers multiple-position feedback (mode 4: pushes only at positions with a
strength), slope feedback (mode 5: pushes from its start position, not on an untouched trigger) and
multiple-position vibration (mode 6: fires only at positions with an amplitude and a frequency).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: scePadGetTriggerEffectState returns libScePad's invalid-argument code
A null state returned 0x80960005, which is SCE_USER_SERVICE_ERROR_INVALID_ARGUMENT,
not a pad error; libScePad's code is SCE_PAD_ERROR_INVALID_ARG (0x80920001), as
scePadSetTriggerEffect returns. The call now lives with the other pad calls in
controller.cpp so controller_settings tests its handle and argument checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: correct trigger effect state reporting
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* systemservice: add an option to report the notice screen as skipped
sceSystemServiceGetNoticeScreenSkipFlag always returned false. Return the
new skip_notice_screen option instead. Games that check this flag skip
their boot logo movies when it is set; Marvel's Wolverine, for example,
then does not queue movies/BootSequence/BootSequence.movie.
The option defaults to off, so behaviour is unchanged unless it is
enabled with --skip-notice-screen true or the launcher's "Skip boot
logos" checkbox. The launcher stores it with the other per-game settings,
so it is included in per-game config import and export.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Shorten skip notice screen wording
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* Map UDS events to trophies via dumped metadata and redesign trophy UI
Correlate each UDS event to its stat ID (uds00.ucp) and trophy target (trophy00.ucp) instead of a hard-coded event, store trophy JSON with unlock date/time outside _SaveData, and add a PS5-style toast, viewer and overview.
Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com>
* Fix trophy rule evaluation and share progress accounting
* Match trophy and reload toolbar styling
---------
Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* libNet: honour the option mask in sceHttpUriBuild
sceHttpUriBuild's `option` argument (SCE_HTTP_URI_BUILD_WITH_*) selects which
components of the SceHttpUriElement end up in the output. HttpUriBuild logged
the value and ignored it, always returning the full URL.
Black Myth: Wukong calls it with SCHEME alone and requires "https://" (or
"http://") back before it starts an HTTP request. The full URL fails that
check, so the request starter returns false. The caller's "run on game thread
and wait" helper then returns early while its task stays queued, still holding
by-reference captures of a stack frame that is already gone. About 70 seconds
into boot the game thread runs that task against the dead stack and faults
(null read at eboot+0x59662f). With the mask honoured the game gets past that
point and reaches its title cinematic and menu.
Bits: SCHEME 0x01, HOSTNAME 0x02, PORT 0x04, PATH 0x08, USERNAME 0x10,
PASSWORD 0x20, QUERY 0x40, FRAGMENT 0x80. A mask with none of the eight bits
set keeps the previous "everything" behaviour for callers that never pass one.
A scheme-only build returns "https://", the authority marker belonging to the
scheme chunk.
Adds TestBuildHonoursOption to http_uri_parse covering scheme-only, hostname,
port, path, and the 0xff / 0 cases.
* libNet: simplify URI build code and tests
---------
Co-authored-by: nmzik <Nmzik@mail.ru>
On Linux (PipeWire / ALSA), the 4-channel USB audio playback device for
the DualSense controller is named 'Wireless Controller' based on Sony's
USB product descriptor string. Previously, FindDevice() only matched
names containing 'DualSense', causing quad-channel endpoint discovery to
fail on Linux systems.
Add 'Wireless Controller' to the allowed endpoint names when 4 channels
are present, and add a test case verifying discovery under this name.
* pad: send DualSense speaker and haptic audio over Bluetooth
* ci: fix Opus clang-cl build and macOS memory tracker test
* docs: remove Bluetooth notes from project README
* pad: keep Bluetooth audio work off emulation timing path
* pad: smooth DualSense speaker audio on USB and Bluetooth
* tests: find available macOS guest range for page manager
* pad: keep haptic waveform when Bluetooth queue overflows
* audio: reject zero output sample frequency
* Simplify DualSense audio routing and fix Bluetooth batching
* controller: add global DualSense volume and vibration controls
* Simplify global controller settings
---------
Co-authored-by: Codex <codex@openai.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
nmzik