* ampr: keep resolved host paths in native form
ResolveOnePath stored each resolved file as a UTF-8 std::string
(Common::PathToString) and the read, stat and size paths turned that
string back into a std::filesystem::path. On POSIX this round trip is a
no-op, but on Windows path(std::string) decodes the bytes with the ANSI
code page, not UTF-8 (/utf-8 only sets the source and execution
charsets). Any non-ASCII character in the game folder therefore produced
a different path: the resolve step found the file through the native
path, then every APR read of it failed with ENOENT.
Tokyo Xtreme Racer (#1156) installed under "D:/Инсталляторы/[ps5]/..."
hits this on its first pak read:
APR read missing host file: .../tokyoxtremeracer/content/paks/global.utoc
Apr read failure 80020002 at CB offset 0 (LowLevelFatalError, abort)
even though KernelStat and the directory listing see the same file.
Store std::filesystem::path in ResolvedPathInfo and the file-id table
and pass it straight to Common::File. Convert to UTF-8 only for the log
lines.
* tests: cover APR stat and size under a non-ASCII host folder
Resolve a file inside a Cyrillic directory through APR and check that
the stat and size exports find it by ID, matching the Tokyo Xtreme
Racer install layout from #1156. On POSIX the old string round trip
also passed, so this guards the Windows path.
* tests: read the non-ASCII APR fixture through an APR command
Review on #1175 noted that the Unicode fixture only checked the stat
and size exports. A submitted APR read opens the stored host path in
ExecuteCommand/ReadHostFileToGuest, which the fixture did not reach.
Add AprReadMatches, which submits one APR read command for a file ID
and compares the bytes, and use it on the file under the Cyrillic
folder. As with the stat and size checks, POSIX hosts run this path but
only Windows would show an ANSI code page round trip.
* Remove APR path tests from this change
* Remove unrelated formatting changes
* Remove native path explanatory comments
---------
Co-authored-by: overlordxrz-source <overlordxrz-source@users.noreply.github.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* libNet: answer sceNpGetAccountLanguage2 as a signed-out user
sceNpGetAccountLanguage2 was not registered, so games that call it hit
the unresolved-import stub. The stub returns 0, which tells the game the
request succeeded and that the language code buffer now holds the
account's language, but nothing was written to it.
Saros (#1053) calls it from its analytics thread right after
sceNpGetAccountAge, each on its own request. sceNpGetAccountAge already
reports SCE_NP_ERROR_SIGNED_OUT there, so the game is told the user is
signed out for one query and signed in for the next. Demon's Souls
(#890), Ghost of Yotei (#1095) and NHL 27 (#1101) import it as well.
Register it next to the other NpManager account queries and answer the
way they do: SCE_NP_ERROR_INVALID_ARGUMENT for a request id <= 0 or a
null output pointer, SCE_NP_ERROR_SIGNED_OUT otherwise. The output is
left untouched because nothing was looked up.
* libNet: reject missing account language requests
---------
Co-authored-by: overlordxrz-source <overlordxrz-source@users.noreply.github.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* Pad: report the adaptive trigger state instead of always 0
scePadGetTriggerEffectState returned 0 for both triggers. Games that wait for
the state of the trigger effect they set before acting on L2/R2 never saw it
change; in Astro Bot, L2/R2 actions such as punches did nothing in some levels.
The state now follows from the game's last effect per trigger (already kept
for the DualSense output) and the trigger's travel, 0..255 over the effect's
ten positions: feedback no force / pushing, weapon not / almost / fully
pressed, vibration not firing / firing, with the values 1..7 that duaLib
(WujekFoliarz/duaLib) reads from a DualSense input report. SDL does not expose
that report, so this is an approximation; it also works with other pads and
the keyboard, where a digital L2/R2 is full travel. The trigger intensity
setting changes only the output, not the reported state.
Tested in Astro Bot (PPSA21567 1.018) by a player in the levels where the
triggers did nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* tests: controller_settings covers scePadGetTriggerEffectState
Feedback, weapon and vibration states across the trigger travel, a trigger without an effect, a masked update keeping the other trigger's effect, and the intensity setting leaving the reported state unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: a feedback trigger reports pushing only while it is pressed
A feedback effect from position 0 reported FEEDBACK_IS_PUSHING on an untouched trigger, so a game waiting for the change from no force to pushing never saw it. In Astro's Playroom the gacha capsules did not break on R2. Feedback states (modes 1, 4, 5) now need some travel (>= 8 of 255). Tested in Astro's Playroom (PPSA01325): the capsules break on R2 again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: a vibration trigger reports firing only while it is pressed
A vibration effect from position 0 reported VIBRATION_IS_FIRING on an untouched trigger; in Astro's Playroom the gun fired by itself. Vibration states (modes 3 and 6) now need some travel, as the feedback states do. Tested in Astro's Playroom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: reject invalid handles in scePadGetTriggerEffectState; test the remaining effect modes
scePadGetTriggerEffectState ignored its handle and returned pad 1's state for any handle. It now returns
SCE_PAD_ERROR_INVALID_HANDLE (0x80920003) for handles other than 1, like the other pad queries in libPad.cpp
and duaLib.
controller_settings now also covers multiple-position feedback (mode 4: pushes only at positions with a
strength), slope feedback (mode 5: pushes from its start position, not on an untouched trigger) and
multiple-position vibration (mode 6: fires only at positions with an amplitude and a frequency).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: scePadGetTriggerEffectState returns libScePad's invalid-argument code
A null state returned 0x80960005, which is SCE_USER_SERVICE_ERROR_INVALID_ARGUMENT,
not a pad error; libScePad's code is SCE_PAD_ERROR_INVALID_ARG (0x80920001), as
scePadSetTriggerEffect returns. The call now lives with the other pad calls in
controller.cpp so controller_settings tests its handle and argument checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pad: correct trigger effect state reporting
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* tests: cover the 16-bit integer VOPC compares
V_CMP_{EQ,LE,GT,NE}_I16 and V_CMP_{EQ,LE,GT,NE,GE}_U16 decode and translate but
no test exercised them. VectorCompareI16U16Ops compares low halves that
differ in sign interpretation (0x8000 vs 0x7fff) with both the signed and the
unsigned opcodes, and uses operands whose high halves differ to check that only
the low 16 bits are compared. It runs in the default list and with
--int16-compare-only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* tests: cover the 16-bit integer VOP3 ALU ops
V_SUB_NC_U16, V_ADD_NC_I16, V_ASHRREV_I16, V_MAX_U16 and V_MIN_U16 decode and
translate but no test exercised them. Vop3Int16Ops checks wraparound without
clamp, the shift amount taken from the low four bits of src0, unsigned
ordering for max/min on 0x8000 vs 0x7fff, that the high halves of the sources
are ignored and that the high half of the destination is preserved. It runs in
the default list and with --int16-alu-only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* tests: cover the packed 16-bit integer VOP3P ops
V_PK_MAD_I16, V_PK_MAD_U16, V_PK_MUL_LO_U16, V_PK_ADD_I16, V_PK_SUB_U16,
V_PK_LSHLREV_B16, V_PK_LSHRREV_B16, V_PK_ASHRREV_I16, V_PK_MIN_I16, V_PK_MAX_U16
and V_PK_MIN_U16 decode and translate but no test exercised them. Vop3pInt16Ops
runs each on both halves with the default half selection: wraparound without
clamp, shift amounts from the low four bits of each src0 half, and min/max on
0x8000 vs 0x0001 so signed and unsigned ordering give different results. It
runs in the default list and with --int16-alu-only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
TestConcurrentBackingReads (7e011fa5) builds its reader pairs with
std::pair {TryReadBacking, TryReadSparseBacking}. Class template argument
deduction then also considers pair's const T1& / const T2& constructors, which
deduce function types, and libstdc++ and libc++ reject a pair member of
function type ("data member instantiated with function type"), so
virtual_memory_allocation_tests no longer compiles on Linux and macOS. MSVC's
library accepts it, which is why Windows still builds.
Take the functions' addresses so the pairs hold function pointers.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* systemservice: add an option to report the notice screen as skipped
sceSystemServiceGetNoticeScreenSkipFlag always returned false. Return the
new skip_notice_screen option instead. Games that check this flag skip
their boot logo movies when it is set; Marvel's Wolverine, for example,
then does not queue movies/BootSequence/BootSequence.movie.
The option defaults to off, so behaviour is unchanged unless it is
enabled with --skip-notice-screen true or the launcher's "Skip boot
logos" checkbox. The launcher stores it with the other per-game settings,
so it is included in per-game config import and export.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Shorten skip notice screen wording
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: nmzik <Nmzik@mail.ru>
* feat(shader): emulate DS_ORDERED_COUNT as a GDS atomic
* fix(shader): issue one ordered-count atomic per wave
* shader: correct ordered-count addressing and wave results
Use the M0 base and pixel packer offset for the GDS counter. Broadcast the
previous value to every lane and preserve the counter when EXEC is empty.
Add GPU regressions for add/exchange with full, partial, and empty EXEC in
wave32 and wave64. The targeted DS and buffer atomic suite passes 63 cases.
---------
Co-authored-by: nmzik <Nmzik@mail.ru>
Dimitar Vagalinski